Инструменты пользователя

Инструменты сайта


wiki:ubuntu-core-arm

Ubuntu Core ARM

https://wiki.ubuntu.com/Core

Deploying Ubuntu Core

Requirements

  • Ubuntu Core rootfs
  • Linux kernel for target device
  • boot-loader for target device

Procedure:

  • Format target media: at least one partition should be ext2, ext3, or ext4
  • Unpack Ubuntu Core to ext{2,3,4} partition
  • Install boot-loader
  • Install Linux
  • Add a local user and password for the user, then add the user to the adm and sudo groups.
  If the Linux kernel requires modules, add these to /lib/modules/$(uname -r) in the ext{2,3,4} file system
  Boot the target device
  Install any additional required software using apt-get
  

On the SD Card rootfs partition, edit the file /etc/shadow and remove the '*' character in between the semi-colons. You should get something like:

   Edit your /etc/network/interfaces file and add the bottom 2 lines: 
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp


echo "nameserver 8.8.8.8" > /etc/resolv.conf

/usr/lib/klibc/bin/ipconfig eth0

apt-get update
apt-get install net-tools
apt-get install ppp
apt-get install usbutils
wiki/ubuntu-core-arm.txt · Последнее изменение: 2013/05/30 13:09 — maxx